-150x150.png)
Fiberglass Anchor Ø10 / 80 cm – Professional Solution for Deep Stabilization
When a project requires uncompromising stability for slopes, dikes, and embankments, standard solutions are often insufficient. The **Fiberglass Anchor Ø10 / 80 cm** is designed for sites where erosion and corrosion are real threats. Thanks to its chemical inertness and significant length, it ensures the "locking" of the geosystem into stable soil layers.
Technical Superiority Over Metal Counterparts
????️ Lifetime Corrosion Guarantee
Metal anchors begin to oxidize immediately after being driven into the soil. Fiberglass does not react with moisture, groundwater, or salts. Once installed, the anchor lasts forever.
????️ High Adhesion (Grip)
The special periodic relief of the profile ensures maximum friction with the soil. This prevents the anchor from "slipping" even under heavy loads from the geocell filler.
⚖️ Labor Optimization
4 times lighter than steel, it allows a single worker to carry and install hundreds of units without fatigue, drastically reducing labor costs on site.
Full System Integration – Smart Metal Group Recommends:
First, lay down Geotextile 200g/m². It separates the natural soil from the filler and prevents the geocell from "sinking".
Spread the Geocell (5 cm height) over the terrain. It will absorb tension and distribute weight evenly.
Drive the Ø10 / 80 cm anchors at key points. Always use a plastic cap to press the cell wall firmly.
Professional Anchoring Instructions
- Drilling: Use a Ø12 mm drill bit. The 80 cm depth requires stable drilling in compacted soils.
- Cleaning: Blow out the hole from dust and small stones for smooth installation.
- Protection: Install the cap to protect the top end of the anchor and secure the geosystem.
???? Expert Advice for Tough Terrains
If you are working on a rocky base where fiberglass meets serious resistance, we recommend starting the installation with our metal anchor with a sharpened tip.
-305x305.png "Plastic Cap for Geocell Anchors Ø 8 mm")
-305x305.png "Plastic Cap for Geocell Anchors Ø 8 mm")