Vertical gardening system

Vertical gardening system

This is a plastic structure for planting green spaces (living walls). Can be used indoors and also outdoors.

The modules are made from 100% recycled material. The design provides holes for drip irrigation.

Module installation is quick and easy. Attached to the wall with metal rails.

Benefits:

• Low price.
• Ease of installation.
• Possibility of additional landscaping.
• The ability to combine different types of plants.
• Heat and sound insulation.

Characteristics:

• Dimensions of one module 500 x 250 x 120 mm
• Number of modules per square meter 8 pcs.
• Plants in one module 10 pcs (80 pcs/sq.m)
• Soil substrate 15 l/module (120 l/sq.m)
• Weight per square meter 10 kg (system only)
• Weight at water saturation 100 kg/sq.m.
• PP material + UV protection
• Packing Pallet 120/120/220 cm (20 sqm)
• Black color
• Metal profile 2 m/sq.m galvanized steel
• Dowel 8 pcs/sq.m 6x60 concrete
• Drip hose Ф16 mm, 2.2 l/h

Installation steps:

• Apply waterproofing to the wall (recommended), even if the water is not in direct contact with it.
  
• Attach the metal strip along the length of the wall at a distance of 50.5 cm vertically using the supplied
• dowels (self-tapping screws if the wall is wooden). Make sure the metal profiles are perfectly aligned. It's exclusive
• important for uniform irrigation of the system.
• Then proceed to the placement of pre-prepared modules according to the prepared project.
• After arranging each horizontal row of the system, place drip irrigation in the holes intended for it.
• You are ready to set the next horizontal row.
• Continue until you reach the highest point of the wall.
• After placing all the elements, it is necessary to place the central riser of the irrigation system. Link to it
• horizontal drip lines. Make sure the system runs smoothly.